LB&SCR E2 class

LB&SCR E2 class
First series E2 with short side tanks, 1913
Type and origin Power type Steam Designer L. B. Billinton Builder Brighton works Build date June 1913–October 1916 Total produced 10
Specifications Configuration: ​  • Whyte 0-6-0T Gauge 4 ft 8+1⁄2 in (1,435 mm) standard gauge Driver dia. 4 ft 6 in (1.372 m) Length 33 ft 3 in (10.13 m) Loco weight 52 long tons 15 cwt (118,200 lb or 53.6 t) (118,200 lb or 53,600 kg) Fuel type Coal Fuel capacity 2.46 long tons (2.50 t; 2.76 short tons) Water cap. 1,090 imp gal (5,000 L; 1,310 US gal) or 1,256 imp gal (5,710 L; 1,508 US gal) Boiler pressure 170 psi (1.2 MPa) Cylinders Two inside Cylinder size 17.5 in × 26 in (444 mm × 660 mm)
Performance figures Tractive effort 21,307 lbf (94.78 kN)
Career Operators London Brighton and South Coast Railway Southern Railway Southern Region of British Railways Power class BR: 3F Withdrawn February 1961–April 1963 Disposition All scrapped

The London, Brighton and South Coast Railway (LB&SCR) E2 class was a class of 0-6-0T steam locomotives designed by Lawson Billinton, intended for shunting and short distance freight trains. Ten examples were built between 1913 and 1916, and were withdrawn from service and scrapped between 1961 and 1963.

Background

By 1910, many of the Stroudley E1 class locomotives were worn out or inadequate for the heavier duties required of them. D. E. Marsh intended to rebuild some examples with a larger boiler, but only one E1X rebuild had been completed by the time of his unexpected retirement. Marsh's successor Billinton reversed this policy and instead ordered five new, more powerful locomotives from Brighton railway works. The new class included several features found on other LB&SCR classes including an I2 class boiler. They were delivered between June 1913 and January 1914.

The second series E2 with extended side tanks, 1915

Second Series

The new design was judged to be successful, except that they were found to have inadequate water supply. Thus when a further order for five locomotives was placed they were given extended side tanks. The second batch were delayed by the onset of World War I, but were eventually delivered between June 1915 and October 1916.

Use

The E2 class locomotives were mainly used for the heavier shunting and short distance freight duties in the London area and on the south coast, as their coal consumption made them unsuitable for long trips. These included empty stock workings at Victoria and London Bridge Stations.

Two were tried on passenger services with Push-pull trains in 1914, with the locomotives in the middle of a rake of six coaches, but the experiment was abandoned during the same year as they consumed too much coal.

Following the electrification of the Brighton line in 1936, the class was used as replacements for the former LCDR T class at the Herne Hill marshalling yard, around Victoria station and at Dover harbour. During World War II, they also replaced the SR Z class at Hither Green marshalling yard.

The class were trialled as dock shunters at Southampton in the 1950s, and were found to be suitable for the task. Six examples were retained for this purpose until their replacement by British Rail Class 07 diesel shunters in 1962.

Withdrawal of the class took place between February 1961 and April 1963, and were all scrapped.

Locomotive summary

LB&SCR No.	Date Built	S.R. No.	B.R. No.	Date Withdrawn
100	June 1913	2100	32100	November 1961
101	August 1913	2101	32101	September 1962
102	October 1913	2102	32102	October 1961
103	December 1913	2103	32103	October 1962
104	January 1914	2104	32104	April 1963
105	June 1915	2105	32105	September 1962
106	September 1915	2106	32106	October 1962
107	March 1916	2107	32107	February 1961
108	July 1916	2108	32108	June 1962
109	October 1916	2109	32109	April 1963

Thomas the Tank Engine

Main article: Thomas the Tank Engine

In 1946, Reginald Payne used the later series of E2 locomotives as the basis for the character Thomas the Tank Engine in the second book of The Railway Series by the Reverend W. Awdry.

00 Gauge models

Trix produced a model of the first series Class E2 in 1961. It was designed for the Trix Twin 3-rail system but could be converted to 2-rail using the optional 2-rail pick up included with the locomotive.

Hornby produced the locomotive in its earliest form as an 00 gauge model. Production lasted from 1979 to 1985 in three distinct variants with four reference numbers. In 1985 the tooling was retired and after some alterations, was instead used as the basis for the Thomas the Tank Engine model.

Bachmann have also produced several different-coloured E2-based models in their Junior Range.

References

• Bradley, D.L. (September 1974). Locomotives of the London Brighton and South Coast Railway: Part 3. London: Railway Correspondence and Travel Society.
• Sibley, Brian (1995). The Thomas the Tank Engine Man. London: Heinemann. ISBN 0-434-96909-5.

External links

• Railuk database
• LB&SCR online, E2 class
• Southern E-Group – LB&SCR E2 Class page